MTI® hose is an air-permeable and resin- blocking line for evacuating the air. It impres- ses by its simple application and a strong sim- plification of the infusion process for the user.
The MTI® valve is inserted into the resin line and controls the resin injection via the pressure independently.
Due to its unique construction and materials, Blade Runner® is more stable than a spiral hose. This makes the resin line easier to lay and fix to the component.
Boat Runner® is an infusion line that was de- veloped for boat building. You choose from a multi-layer composite that is sewn around the resin pipe.
Squeezee® and Squeezer® are line clamps for either feedlines or vacuum lines. By their smart design lines can be clamped or regulated. The resin flow can be regulated very sensitive with two fingers.
Resin Brake Line® is a vacuum line with a strong resin-braking functional film. The Re- sin Brake Line is relocated on the edge of the component and used to evacuate the air.
Sidewinder® is an inexpensive resin Distribution line for large components. The Design allows an equal resin front even with long barrel lengths.
Vac Checker® shows the absolute pressure, which is essential for a successful infusion. This value shows the vacuum regardless of the ambient pressure in the Component.
The Sticky Can® is a spray adhesive develo- ped by DD-Compound. It is transparent and very fine. This makes it ideal for visible carbon components.
Do you need any more information?